Simple Warhammer 40k terrain: silos

I recently painted up a Tyranid kill team and I have a couple more kill teams lined up, so obviously I need some suitably grimdark terrain for them to fight over! The first piece is a simple rusty silo made from two soda cans (diet Coca Cola Vanilla, my favourite ;-). I think the narrower, taller 250 ml cans are perfect for making industrial silos. I simply hotglued two of these cans to a bit of scrap plastic. The hot glue made the plastic base warp quite a bit, but applying some pressure until the glue had cooled down took care of this. I then added some cardboard details and tubes made from a couple of drinking straws. The round vents or hatches on top come from some old 3,5 inch floppy disks I had laying around.

Here are the silos before painting.

I then gave everything a coat of grey primer from a spray can, painted the silos green and gave it a black wash. For the rust effect I stippled brown and orange all over the piece with a bit of sponge. The effect looked okay on the grey bits, but was terribly blotchy on the green parts, so I painted those over and added some orange rust streaks instead. I then gave everything another wash of black to tone down the colours a little. Finally, I painted the base brown, gave it a black wash and added some flock.

And here are two more shots of them all painted and grimed up.

Comments

More simple Warhammer 40k terrain: craters and rubble piles

Time for some more simple 40k scenery: craters and rubble piles. Both are pretty easy projects and pretty quick too, if unlike me you plan out your work a little so you don’t need to continuously correct your mistakes along the way! For the craters, I started with two old writeable dvd’s. I first closed off the central holes with mdf miniature bases. I then broke off semi-triangular wedges of cork from a pan coaster and hotglued these to the dvds, forming circles (see the picture below). I then applied wall filler to the craters to hide the mdf circles covering the central holes and to add some texture to the cork. I then glued smaller bits of cork in between the larger wedges and added coffee grounds for texture. After this step I noticed that the cork wedges didn’t look very natural. Tapering them off made them look a lot better (picture below). I then gave everything a coat of black paint: I still thought the craters didn’t look quite right, though. They were a bit too uniform ...

Holy cel-shaded abs, Batman!

I thought I’d do something a little different for my first post of 2023. I picked up this Batman figure second hand about 15 years ago. Back then he wore an all black suit with the Tim Burton yellow logo and a yellow utility belt. I had repainted him years ago, but never really liked the result, so over the Christmas break I had another crack at it. I sculpted a new bat logo out of Miliput, filled in some of the joints, and repainted Batsy in a cel-shaded style somewhat similar to Mike Mignola’s artwork. I did this by illuminating the figure from the top left and then tracing the shadows. I tried to paint him so that the effect works from all angles, but I think it’s most effective from the front and left. The colour palette is very limited: Vallejo Medium Sea Grey 70.870 and Black 70.950 for the suit, Flat Earth 70.983 and Charred Brown 72.045 for the utility belt and Basic Skin Tone 70.815 for the skin. By the way, it may not come across in the pictures, but at 30 cm Batsy ...

Gloomhaven characters

Back in the winter of 2020/2021, my wife and I played a lot of Gloomhaven. After several months of playing multiple games a week we put it away for a while, but recently we picked it back up again. Gloomhaven is probably one of the best tabletop games I’ve played. The only downside in my mind is that it can easily take you 15 minutes to set up a scenario, especially if you don’t invest in some aftermarket box inserts to organise the literally thousands of tiles, tokens, cards and standees. But once you’ve set everything up, the game plays really well. Plus, I really like that it is a cooperative game in which the players need to work together to get through a scenario. Anyway, the game comes with 18 plastic ‘heroic’ 28 mm or 32 mm scale miniatures. The monochrome grey plastic really stands out against the beautifully colourful floor tiles, so obviously these had to be painted... The plastic is a bit softer than your average model kit, but a lot harder than the soft plas...

Little Tanks & Tiny People

Search This Blog