Skip to main content

Posts

Showing posts with the label Revell

More Dutch aircraft

Oops, it’s already August and this is only my third post of the year… In my defence, I’ve been rather busy starting a new job back in April, finishing my PhD in June and starting a new hobby of learning how to fly gliders. While I did do a fair bit of hobbying this year, I haven’t gotten ‘round to posting about it. So, here is a quick post of three more Dutch Aircraft. First up is a Spitfire Mk. V of 322 (Dutch) Sqn. RAF with the markings of Jan Leendert Plesman. After the war, 322 Sqn. would become the first squadron of the newly formed RNLAF. The kit is by Airfix and the markings were cut and assembled from an aftermarket decal sheet for the RAF New Zealand squadrons. Up second is a Gloster Meteor F. Mk.4 of 324 Sqn. stationed at Leeuwarden AB c. 1950. The kit is by Special Hobby and was built as is. The aircraft is very tail heavy and the instructions do not mention that you should weigh down the nose. So, having already closed up the hull and finding out that she would not stand up...

Cold War Dutch for Team Yankee

Bit of a longer post this time, as I painted up an entire Cold War Dutch army for Team Yankee! The army consists of five Leopard 1Vs, five Leopard 2s, two PRTLs, two F-16s, two West-German Tornados and a set of Dutch mechanised infantry.  Leopard 2 Team Yankee is set in the mid 1980’s, at which time the Royal Netherlands Army was in the process of replacing its Leopard 1V’s for Leopard 2’s. Delays meant that this process took quite a long time. In fact, there had also been severe delays in procuring the Leopard 1, which meant that there were even some old 1950’s vintage Centurions left in service!   Leopard 1V For a bit of variety I picked up a set of Leopard 1Vs and Leopard 2s, but for gaming purposes I’ll run both as the more powerful Leopard 2’s. I also bought two Cheetah PRTLs (Pantser Rups Tegen Luchtdoelen = Armour Tracked Against Aerial Targets). This vehicle is derived from the German Gepard and is basically an anti-aircraft turret on top of a Leopard 1 chassis. Ch...

RNLAF F-16 NATO Tigermeet 1991

You may remember that I built some 1/144 scale jets last year. Well, it’s time for another jet now, only in 1/72 scale this time. This is one of two Dutch F-16’s of 313 squadron sent to the 1991 NATO Tigermeet at RAF Fairford. The two jets were given a special paint job for the occasion. Back then, 313 squadron was stationed at Twenthe Airbase at Enschede. The red banner with rampant horses on the tail is derived from the flag of Twenthe. The model is a rather old kit by Revell, which I picked up second-hand. The kit must have been made somewhere in the mid 90’s, but I remember reading somewhere that it was basically a reissue of a kit from 1976 with a small upgrade sprue and new decals to turn it into a Dutch F-16. Two big identifiers of the Dutch F-16’s made under licence by Fokker are the drogue parachute in the tail and the tinted glass of the canopy. The other of the two planes sent to the 1991 Tigermeet.   Given that it is such an old kit, it went together pretty well. T...

Hollywood jets: Top Gun vs. The Final Countdown vs. Iron Eagle

I had so much fun painting my little MIG’s and Sabres that I wanted to do a couple more. I thought it would be a neat idea to recreate the famous ‘Because I was inverted’ scene from Top Gun, which meant that I would need an F-14 Tomcat and an F-5 Tiger, which was used in the movie to represent a non-existent MIG-28. After a bit of searching online I found a nice lot of second-hand kits, all by Revell. The lot consisted of two F-5 Tigers, an F-14 Tomcat and an F-16 Viper. Of course, I knew that the decals of the F-14 wouldn’t match the markings on Maverick’s jet. I hadn’t expected, though, that they would match those of the Tomcats featured in 1980’s The Final Countdown. I’ve never seen the movie, apart from some clips on Youtube, but apparently it’s about an aircraft carrier travelling back in time to World War II. Sounds rather silly, but the Tomcats in it look pretty cool. I didn’t paint my F-14 to be exactly like the one from the movie. I didn’t have the correct grey and only rea...

Death from above diorama, part 2 (finished)

So, the plane was a bit more difficult to assemble than expected. The parts didn’t really fit properly and there was quite a bit of flash. More annoyingly the model was designed to be built with its landing gear extended and the wheels and hatches were moulded as one part. Then again, you can’t really complain with a kit that’s under three euro’s. I tried cutting off the wheels and gluing the hatches on flat, but in no way was I able to make them fit. In the end I simply filled in the holes with some wall filler. Here is the underside of the aircraft after two applications of wall filler and some sanding. After this picture was taken I applied one more coat of filler to smooth everything out. I forgot to take some pictures during painting, but here is the Typhoon painted and with decals. I’ve already mounted it to the base, but have not yet added the canopy.  And here is the finished build. I tried to be clever when gluing on the canopy, because I didn’t want the clear plastic to f...

Death from above diorama, part 1

I’ve been working on a little side project while waiting on the paint on other projects to dry. I thought it would be cool to build a 1:144 scale diorama of a Hawker Typhoon destroying a German tank. The plan is to mount the plane flying over the tank mid-explosion, with the tank’s turret flying off. I started by buying a Revell Microwings Hawker Typhoon kit, which cost me a whopping € 2,50. The shipping cost more than the kit... Then I looked for an affordable German tank in scale 1:144. Victrix Models has a nice line of tanks in that scale, but you can only purchase boxes of six and I only needed the one. In the end I bought two toy Panther tanks on Wish for a total of   € 3,- (including shipping!). A month later, the little tanks arrived from China and I could start building. Here are the cheap Panther tanks. The turrets came separate and I have not pressed them down fully here, because I didn’t know if I would be able to remove them again. For some reason the tanks were fitte...