Skip to main content

Cold War Dutch, part 2: DAF YP-408

I’ve been thinking of getting an armoured personnel carrier for my Cold War Dutch troops. Various options were open to me, including the tracked AMX-PRI (APC variant of the French AMX-13) or the YPR-765 (based on the American M-113), but in the end I settled on the blocky biscuit tin on wheels that is the YP-408.

DAF YP-408 APC

The YP-408 was built by the Dutch DAF company and had eight wheels, of which the front two and rear four were powered. It had a crew of two, could carry up to eight infantrymen in the back and was armed with a Browning .50 cal on the top. The name is not just a random bunch of letters and numbers, but refers to the type and class of the vehicle: Y = military vehicle, P = armoured vehicle, (pantserwagen), 4 = carrying capacity in tonnes, 0 = serial number, 8 = number of wheels. It was produced from 1959 to 1968 and remained in Dutch service until 1989. When the former Dutch colony of Suriname became independent in 1975, a number of vehicles were given to that country. In the early 1990’s several vehicles were also given to Portugal for air base security.

As with the Dutch miniatures, there is of course no company that sells 28mm scale kits of such a niche vehicle. Luckily for me, though, Butler's Printed Models offer 3d printed versions of the YP-408 in a variety of scales. Having no experience with 3d printed miniatures, I decided to buy a test piece. The staff at Butler's Printed Models were kind enough to remove most of the support material, so I only needed to do a little bit of cleanup.

DAF YP-408 APC

(Sorry for the white on white picture). As you can see, there are quite noticeable artefacts from the 3d printing process. I sanded off most of the texture on the sloped frontal armour plates, but in most places details and sticky-out bits made it impossible to remove this texture. After painting, however, the print lines are much less noticeable.

DAF YP-408 APC

Here it is with its olive drab base coat and the wheels painted. The model seemed a little bit small in comparison to my figures, so I mounted it on a base for some added height. I only applied texture to the base after finishing the model, which made painting and sealing a right pain. Something to keep in mind for next time...

And here it is all painted up and weathered. I love the mixed signals that these Dutch military vehicles are sending. Designer 1: We want the vehicle to be difficult to spot, so let’s give it a low profile and paint it green! Designer 2: It also needs to be road legal, though, so let’s add two bright yellow licence plates and yellow and red reflectors all over the vehicle!

Painting the markings, flags and licence plates was a fiddly job but really fun to do. I’m quite happy with the end result. So much so, that I immediately ordered two other (different) vehicles, that will feature in a future post!

DAF YP-408 APC

DAF YP-408 APC

DAF YP-408 APC

DAF YP-408 APC

DAF YP-408 APC

DAF YP-408 APC

DAF YP-408 APC

Labels:

Comments

  1. Ruud22 October 2024 at 16:45

    Is there a chance you can share me the files for the 3D print. My dad served in these armoured vehicles in the 60ies.

    ReplyDelete
    Replies
    1. littletanksandtinypeople1 June 2025 at 18:08

      Sorry, didn't see your comment until now... I bought a printed model, so I don't own the files. But you could order a copy yourself from Butler's Printed Models.

      Delete

Post a Comment

Popular posts from this blog

More simple Warhammer 40k terrain: craters and rubble piles

Time for some more simple 40k scenery: craters and rubble piles. Both are pretty easy projects and pretty quick too, if unlike me you plan out your work a little so you don’t need to continuously correct your mistakes along the way! For the craters, I started with two old writeable dvd’s. I first closed off the central holes with mdf miniature bases. I then broke off semi-triangular wedges of cork from a pan coaster and hotglued these to the dvds, forming circles (see the picture below). I then applied wall filler to the craters to hide the mdf circles covering the central holes and to add some texture to the cork. I then glued smaller bits of cork in between the larger wedges and added coffee grounds for texture. After this step I noticed that the cork wedges didn’t look very natural. Tapering them off made them look a lot better (picture below). I then gave everything a coat of black paint:  I still thought the craters didn’t look quite right, though. They were a bit too uniform ...
2 comments
Read more

Gloomhaven characters

Back in the winter of 2020/2021, my wife and I played a lot of Gloomhaven. After several months of playing multiple games a week we put it away for a while, but recently we picked it back up again.  Gloomhaven is probably one of the best tabletop games I’ve played. The only downside in my mind is that it can easily take you 15 minutes to set up a scenario, especially if you don’t invest in some aftermarket box inserts to organise the literally thousands of tiles, tokens, cards and standees. But once you’ve set everything up, the game plays really well. Plus, I really like that it is a cooperative game in which the players need to work together to get through a scenario.   Anyway, the game comes with 18 plastic ‘heroic’ 28 mm or 32 mm scale miniatures. The monochrome grey plastic really stands out against the beautifully colourful floor tiles, so obviously these had to be painted... The plastic is a bit softer than your average model kit, but a lot harder than the soft plas...
Post a Comment
Read more

Roman watchtower

After wrapping up my wee Roman army with my Roman cavalry unit last month I needed a bit of a change of pace. Designing and scratch building a Roman watchtower to go with my army seemed just the thing.   Most models of Roman watchtowers you find online are based on stone examples like those found along Hadrian’s Wall or in southern Germany. I, however, wanted to build a tower more like those found along the Dutch part of the limes , the border of the Roman Empire. As stone is pretty hard to come by in this tiny flat country of ours, watchtowers were either made entirely out of timber or had a timber frame with inset wattle and daub sections.   I particularly liked the look of the reconstructed watchtower at Vleuten-De Meern, with its dark timber frame and yellow wattle and daub. As you can see, my tower is quite heavily influenced by the Vleuten-De Meern watchtower, although I wasn’t too strict when it came to the exact dimensions. The reconstructed watchtower at Vleuten-...
Post a Comment
Read more